Galvanic Isolator (16a) Plug In with Status Alert

Surge Protection to 120 amps

Fitting a Plug In Galvanic Isolator couldn’t be simpler, because you don’t need any electrical knowledge or tools, and fitting takes about 30 seconds. And it’s guaranteed to work just as well as the wire-in type. 

This model offers several real benefits over standard galvanic isolators.

The most obvious benefit is the Status Alert Indicator, which constantly monitors your boats earth connection for faults that could lead to corrosion of the hull, or even life threatening mains voltage earth leakage faults.

Bright, easy to read indicators on the galvanic isolator warn you immediately a problem is detected.

Under the bonnet, there is our “2-stage Protection System”, which protects your hull against electrical noise and Galvanic & Stray Voltages up to twice as high as normal galvanic isolators.

2-Stage Protection is advised where you have electrical items with Switch Mode power supplies.

Most battery chargers, mobile phones, computers, TV’s etc have these, and some of them can introduce electrical “Noise” into your boats electrical system. In extreme cases, the noise can defeat single stage galvanic isolators, so we have developed the 2-Stage Protection System to give you added protection.

How It Works…

Check your earthing at a glance.

Both Lights OFF: Your galvanic isolator is operating normally, so no action is required – just check back occasionally to ensure that all’s well.

One Light ON: If either of the lights are on, it indicates DC leakage. This can cause severe corrosion to your boat. Our instructions give clear basic advice on how to resolve the problem.

BOTH lights ON: If both lights are ON, this indicates AC leakage, probably from the mains wiring or a connected appliance. AC leakage can be a danger to life. Please see instructions for help in rectifying the problem.

This Galvanic Isolator is designed to STOP Galvanic AND Leakage currents in their tracks, whilst ensuring that the safety electrical earth is unaffected. So you remain FULLY PROTECTED from electrical faults. Its a quick, simple no-compromise solution to the corrosion that YOUR boat will almost certainly be suffering unless you have an Isolator fitted. Plus our 2-Stage Protection System gives you protection against voltages of up to TWICE that of normal isolators.

The Gi50/16/SA galvanic isolator is fully guaranteed for 5 years against faulty materials and manufacture.

Furthermore, we offer a FREE checking service for your peace of mind. (You may want to get your galvanic isolator checked in the event of a major electrical fault, lightning strike etc).

If your mains connecting cable has a socket that matches the measurement in the photo, this is the correct galvanic isolator for you.

IN STOCK for immediate dispatch.

Galvanic Isolator Specification

The GI50/16/SA galvanic isolator is suitable for shore supplies that are protected by a RCD (Earth leakage circuit breaker) with a tripping current of 30mA or less, and MCB 16a or less. If in doubt, please contact a qualified electrician, or call us on 0757 807 3490