• Galvanic Isolators - High Performance and CE marked

If you connect to an electric hook up, a Galvanic isolator is a MUST. Without it, you run the risk of Galvanic currents causing serious damage to your boat’s hull, prop and other underwater metalwork, to say nothing of dramatically shortening the life of your anodes.

The same applies whether your boat’s in fresh water, salt water or anything in between. And even if your boat doesn’t have a metallic hull, chances are that you still have a lot of (expensive) metalwork in the water.

A simple Galvanic isolator can stop corrosion currents from flowing in your hook up cable, which is the single biggest cause of Galvanic corrosion. The isolator takes seconds to fit, and you don’t need an electrician, (or even a screwdriver) for that matter. And your protection is INSTANT - you don’t have to wait for it to “build up”. And even if you already have corrosion problems, a Galvanic isolator could stop the rot from getting so much worse.

All our products are CE marked for your safety and peace of mind.