Galvanic Isolator - Plug In - EXTRA Protection - Status Alert - AC Bypass Capacitor
Surge Protection to 500 amps
Fitting a Plug In Galvanic Isolator couldn’t be simpler. You don’t need any electrical knowledge or tools, and fitting takes about 30 seconds. And it's guaranteed to work just as well as the wire-in type.
This model offers EXTRA Protection over standard Galvanic isolators.
The most obvious benefit is the Status Alert Indicator, which constantly monitors your boats earth connection for faults that could lead to corrosion of the hull, or even life threatening mains voltage earth leakage faults.
Bright, easy to read indicators warn you immediately a problem is detected.
Extra Protection. Under the bonnet, there is our "2-stage Protection System", which protects your hull against electrical noise and Galvanic & Stray Voltages up to twice as high as a normal Galvanic isolator.
Extra Protection is strongly advised - especially if you have electronic items on board.
Most electronic equipment, mobile phones, computers, TV's etc have "switch mode power supplies, and these can introduce electrical "Noise" into your boats electrical system. In extreme cases, the noise can defeat single stage galvanic isolators, so we have developed our Extra - Protection System to give you added protection.
How It Works...
Check your earthing at a glance.
Both Lights OFF: Your Galvanic isolator is operating normally. No action required, so just check back occasionally to ensure that all's well.
One Light ON: If either of the lights are on, it indicates DC leakage. This can cause severe corrosion to your boat. Our instructions give clear basic advice on how to resolve the problem.
BOTH lights ON: If both lights are ON, this indicates AC leakage, usually from the mains wiring or a connected appliance. AC leakage can be a danger to life. Please see instructions for help in rectifying the problem.
Our Gi120/P/SA Plug In Galvanic Isolator simply connects between your shore supply and the mains inlet of your boat. You can fit it at either the boat end or the shore end. The picture shows it fitted at the shore end.
- Status Alert Indicators
- Extra Protection
- AC Bypass Capacitor
- Uses NO power
- 100% Maintenance Free
- 30 Seconds to Fit
- LIFETIME Guarantee
This Galvanic isolator is designed to STOP Galvanic AND Leakage currents in their tracks, whilst ensuring that the safety electrical earth is unaffected, so you remain FULLY PROTECTED from electrical faults. Its a quick, simple no-compromise solution to the corrosion that YOUR boat will almost certainly be suffering unless you have a galvanic isolator fitted. Plus our 2-Stage Protection System gives you protection against voltages of up to TWICE that of a normal Galvanic isolator.
The Gi120/S/SA has a LIFETIME guarantee against faulty materials and manufacture. We also offer a FREE checking service for your peace of mind. (You may want to get your Galvanic isolator checked in the event of a major electrical fault, lightning strike etc).
If your mains connecting cable has a socket that matches the measurement in the photo, this is the correct Galvanic isolator for you. This size fits 99% of canal/river boats, and the majority of other types of vessel.
Galvanic Isolator Specification
Voltage: 110 – 250Vac
Surge Current 500A
Connector size 16A
AC Bypass Capacitor
30 second install time
DC Status monitoring: YES
AC Status Monitoring: YES
2-Stage Protection: YES
Temperature Range -50c to 120c
Fully Waterproof body to IP66
Connectors Waterproof to IP44
Fit & Forget Design