Laying Up Or Staying In A Marina Over Winter? Here’s How To Protect your boat from damaging Galvanic currents. 

galvanic currents on boats

Not everyone can use their boat year-round. If you’re storing your boat for the winter, it makes good sense to keep it plugged in to charge the batteries etc. But the same electrical connection that’s keeping your batteries healthy could also be rotting a hole in the hull, or corroding the prop.

When your boat is connected to shore power, small electrical currents flow through the ground wire. These “Galvanic” currents can cause serious damage by corroding a boat’s underwater metalwork. It’s a slow but relentless process that can cost thousands of pounds to repair.

Myth Buster!!

A circuit breaker can not stop Galvanic currents from flowing. Only Galvanic isolation can stop these damaging “Corrosion Currents”, and the simplest solution is a plug in Galvanic isolator. Our Galvanic isolator just plugs into your electric hookup cable and breaks the electrical connection between the boat and shore power without affecting the AC current that flows to your boat. This is what prevents Galvanic currents from flowing and damaging the hull, prop etc.

Fitting our Galvanic isolator takes a few seconds, and you don’t need any tools or electrical knowledge! Then you can enjoy the autumn & winter months, knowing that Galvanic Currents won’t be sinking YOUR boat!

 

For more information, please click <HERE>.

Laying Up Or Staying In A Marina Over Winter? Here’s How To Protect your boat from damaging Galvanic currents. 

galvanic currents on boats

Not everyone can use their boat year-round. If you’re storing your boat for the winter, it makes good sense to keep it plugged in to charge the batteries etc. But the same electrical connection that’s keeping your batteries healthy could also be rotting a hole in the hull, or corroding the prop.

When your boat is connected to shore power, small electrical currents flow through the ground wire. These “Galvanic” currents can cause serious damage by corroding a boat’s underwater metalwork. It’s a slow but relentless process that can cost thousands of pounds to repair.

Myth Buster!!

A circuit breaker can not stop Galvanic currents from flowing. Only Galvanic isolation can stop these damaging “Corrosion Currents”, and the simplest solution is a plug in Galvanic isolator. Our Galvanic isolator just plugs into your electric hookup cable and breaks the electrical connection between the boat and shore power without affecting the AC current that flows to your boat. This is what prevents Galvanic currents from flowing and damaging the hull, prop etc.

Fitting our Galvanic isolator takes a few seconds, and you don’t need any tools or electrical knowledge! Then you can enjoy the autumn & winter months, knowing that Galvanic Currents won’t be sinking YOUR boat!

For more information, please click <HERE>.