Description
Galvanic Isolator – Plug In – Status Alert
Surge Protection to 500 amps
LIFETIME Guarantee
Fitting a Plug In Galvanic Isolator couldn’t be simpler. You don’t need any electrical knowledge or tools, and fitting takes about 30 seconds. And it’s guaranteed to work just as well as the wire-in type.
This model offers many benefits over standard galvanic isolators.
The most obvious benefit is the Status Alert Indicator, which constantly monitors your boats earth connection for faults that could lead to corrosion of the hull, or even life threatening mains voltage earth leakage faults.
Bright, easy to read indicators warn you immediately a problem is detected.
Under the bonnet, there is our “2-stage Protection System”, which protects your hull against electrical noise and Galvanic & Stray Voltages up to twice as high as a normal galvanic isolator.
Most battery chargers, mobile phones, computers, TV’s etc have these, and some of them can introduce electrical “Noise” into your boats electrical system. In extreme cases, the noise can defeat single stage galvanic isolators, so we have developed our 2-Stage Protection System to give you added protection.
2-Stage Protection is advised where you have electrical items with Switch Mode power supplies.
How It Works…
Check your earthing at a glance.
Both Lights OFF: Your galvanic isolator is operating normally. No action required, so just check back occasionally to ensure that all’s well.
One Light ON: If either of the lights are on, it indicates DC leakage. This can cause severe corrosion to your boat. Our instructions give clear basic advice on how to resolve the problem.
BOTH lights ON: If both lights are ON, this indicates AC leakage, usually from the mains wiring or a connected appliance. AC leakage can be a danger to life. Please see instructions for help in rectifying the problem.
Our Gi120/32/SA Plug In Galvanic Isolator simply connects between your shore supply and the mains inlet of your boat. You can fit it at either the boat end or the shore end. The picture shows it fitted at the shore end.
■ Status Alert Indicators
■ 2-Stage Protection
■ Uses NO power
■ 100% Maintenance Free
■ 30 Seconds to Fit
■ LIFETIME Guarantee
This galvanic isolator is designed to STOP Galvanic AND Leakage currents in their tracks, whilst ensuring that the safety electrical earth is unaffected, so you remain FULLY PROTECTED from electrical faults. Its a quick, simple no-compromise solution to the corrosion that YOUR boat will almost certainly be suffering unless you have a galvanic isolator fitted. Plus our 2-Stage Protection System gives you protection against voltages of up to TWICE that of a normal galvanic isolator.
The Gi120/32/SA has a LIFETIME guarantee against faulty materials and manufacture. We also offer a FREE checking service for your peace of mind. (You may want to get your galvanic isolator checked in the event of a major electrical fault, lightning strike etc).
Will it Fit??
If your mains connecting cable has a socket that matches the measurement in the photo, this is the correct galvanic isolator for you. Please measure before you buy, as most systems use the smaller 16A connectors
Galvanic Isolator Specification
• Voltage: 110 – 250Vac
• Surge Current 500A
• Connector type 32A
• 30 second install time
• DC Status monitoring: YES
• AC Status Monitoring: YES
• 2-Stage Protection: YES
• Temperature Range -30c to 50c
• Fully Waterproof body to IP66
• Connectors Waterproof to IP44
• Quality Construction
• Fit & Forget operation
The Gi-120/32/SA galvanic isolator is suitable for shore supplies that are protected by a RCD (Earth leakage circuit breaker) with a tripping current not exceeding 30mA. If in doubt, please contact a qualified electrician, or call us on 0757 807 3490.
While we make every effort to accurately represent our products, appearance may differ slightly from images. We appreciate your understanding.
